Table of Contents
Advertisement
Check points
See page 34 for changing film speed with DX-coded film or selecting
film advance mode.
Shutter curtains are very thin. Make sure not to touch the shutter
curtains with your finger or film leader.
Avoid direct sunlight when changing film outdoors.
3.
Press the shutter release button. Film automatically
4
advances to the first frame.
• When 1 appears on the LCD panel, the film has advanced to the first
frame.
• When Err and E blink in the LCD panel and viewfinder, film is not
properly installed. Open the camera back again and reload film.
• a, s and Err blink and the shutter locks when a non-DX-coded film is
loaded with camera film speed set to s. Set film speed manually (page
34).
• Frame number display remains when the power switch is off.
• You can check the number of available exposures on the film roll through
the film cartridge confirmation window.
·
8: Camera can be set to advance the film automatically to the first
frame after the camera back is closed (page 72).
Set the film advance mode selector to S (single-
3.
5
frame shooting) while pressing the film advance
mode selector lock release.
21
Hide quick links:
Advertisement
Table of Contents
