Bluetooth And Wwan Radios On Windows Mobile 5.0 - Symbol MC9090-G RFID User Manual Supplement

1 - 12 MC9090-G RFID User Guide Suppliment
Wireless Connection Status Icon
Figure 1-7
To turn the radio back on, tap the
. The red X disappears from the icon indicating that the radio is enabled (on).
Enable Radio

Bluetooth and WWAN Radios on Windows Mobile 5.0

NOTE The Flight Mode feature only turns off the WWAN and Bluetooth radios. The WLAN radio must be turned
off separately.
To turn off the Bluetooth and WWAN radios, tap the
icon
Antenna/Signal
NOTE On the MC9090, it takes two to five seconds for the radio to shut down.
To turn on the Bluetooth and WWAN radios, tap the
icon
Antenna/Signal
NOTE On the MC9090, wait 20 to 40 seconds for the radio to power on. During this time do not suspend the
mobile computer or remove the battery. If the mobile computer is suspended or the battery is removed,
warm boot the mobile computer.
The MC909X User Guide, P/N: 72E-72215-xx provides the Bluetooth support information applicable to the
MC9090-G RFID mobile computer.
Wireless Connection Status Icon
Wireless Connection Status
(on WWAN devices) and select
(on WWAN devices) and select
icon at the bottom of the Today screen and select
icon (on non-WWAN devices) or the
Connectivity
.
Turn On Flight Mode
icon (on non-WWAN devices) or the
Connectivity
.
Turn Off Flight Mode