D-Link DVG-N5412SP User Manual page 66

Voip wireless router
Hide thumbs Also See for DVG-N5412SP:
Table of Contents

Advertisement

DVG-N5412SP User's Manual
Ring (Early Media) Time Limit[10 - 600secs]: Enter the timeout to cancel a call if no one answers the
phone.
Enable End of Digit Tone: Check the box to activate the function of playing a "Beep-Beep" tone to notify
the user that the call is in progress.
Force Calling Thru PSTN Code: Fill prefix code to dial out through PSTN(Life Line) port.
Early Media Treatment: Check the box to send the one-way RTP immediately when a connection with a
VoIP service provider has been set up.
Loop Current Drop Trigger Time: Enter the time to avoid the line being engaged when FXS port is
connected to PBX. It stops the loop current from FXS port when FXS port is playing busy tone. The setting
"0" zero is to disable this function.
Loop Current Drop Duration: Enter the drop duration for loop current.
ROH Begin Time: As users forget hang up phone set it makes FXS play loud Howler Tone to notify users
put hand set correctly. If this timer is set to be 20 seconds, that FXS play busy tone for 20 seconds then
play ROH.
ROH Duration: It is the maximum time for FXS play ROH, then FXS will stop play ROH and keep silence.
FXS Ring Voltage: It is to set the Ring Voltage of FXS.
FXS Onhook Voltage: It is to set the idle Voltage of FXS.
VoIP Centrex Extension Digit Count: This feature is to enable and set the digit count of VoIP Centrex.
The setting "0" zero is to disable this function.
VoIP Centrex Digit: Enter the digit for VoIP call. If you dial VoIP Centrex Digit first, the dialing plan is
according to the Digit Map; otherwise the VoIP Gateway will send the number which digit count is the same
as VoIP Centrex Extension Digit Count.
Metering Pulse Type/ Metering Pulse Period: It is used for telephony device which connected to FXS
port for billing purpose. DVG-N5412SP provide 12k Hz and 16k Hz metering capacity. The fully support
for detail Metering Pulse Period is not free charge, please contact with your vendor.
ADVANCED → VoIP → Line
FXS Impedance: Select different impedance from the drop-down menu.
D-Link Systems, Inc.
ADVANCED
66

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents