Tips About Indicator Panel; Full Power Operation - Bosch EHP 6.5 AA Operation Manual

TIPS ABOUT INDICATOR PANEL

The indicator panel will change each time you
press the DISPLAY button in the following man-
ner.
Display button
Outdoor Temp.Lamp lights up
The blue PLASMACLUSTER lamp and
the green FULL POWER lamp will also
go off.
NOTE:
• The displayed temperatures are rough estimates and
may vary from the actual temperatures.
• is displayed until the temperatures are being
detected.
• Only the room temperature can be displayed for 5
seconds when the unit is not in operation.
• During SELF CLEAN operation, the indicator panel
will display remaining time of the operation. Room
and outdoor temperature will not be displayed even if
you press the DISPLAY button.
• Temperature display ranges
Room temperature
Temperature Indicator
Outdoor temperature
Temperature Indicator
*
*The minus symbol "-" is not displayed.
The room
temperature is
displayed .
The outdoor
temperature is
displayed.
No display.
Room temperature
Above 40˚C
0˚C~40˚C
Below 0˚C
Outdoor temperature
Above 45˚C
-19˚C~45˚C
-25˚C~-20˚C
Below -25˚C
GB-7

FULL POWER OPERATION

In this operation, the air conditioner works at the
maximum power to makes the room cool or warm
rapidly.
1
Press the FULL POWER button during
operation.
• The remote control will display "
• The temperature display will go off.
• The green FULL POWER lamp (
the unit will light up.
TO CANCEL
Press the FULL POWER button again.
• The green FULL POWER lamp (
will turn off.
NOTE:
• You can not set the temperature or fan speed during
the FULL POWER operation.
• FULL POWER operation will be automatically
cancelled in one hour, and the unit return to the
original settings. The green FULL POWER lamp
( ) on the unit will turn off.
".
) on
1
) on the unit