Table of Contents
Advertisement
How to Use the Minute/S~ond ~mer
The Minute/Second Timer has
three timing functions:
It operates as a minute timer.
It can be set to delay cooking.
It can be used as a hold setting
after defrosting.
The Minute/Second Timer operates
without microwave energy.
How to ~me a 3-Minute
Phone Call
1.
Touch MIN/SEC TIMER pad.
The display shows ": O" and
"ENTER TIME" flashes.
2. Touch number pads 3,0 and O
(for 3 minutes and no seconds).
Display shows "3:00" and "TIME:'
3. Touch START. Display shows
time counting down.
4. When time is up, oven signals,
flashes "EndJ' and display shows
time of day.
The Minute/Second Timer can also
be used to program a "holding
time" between microwave cooking
functions. The time can range from
one second to 99 minutes and 99
seconds. A holding or standing
time may be found in some of your
own recipes or in the Cooking Guide.
To delay cooking up to 99 minutes
and 99 seconds, touch either TIME
COOK or TEMP COOK/HOLD
and enter cook time or temperature.
Touch MIN/SEC TIMER and enter
number of minutes to delay cooking.
When delaying cooking by
temperature, be sure probe is in
food.
Touch START. Timer will
count down to zero and cooking
will begin.
How to Defrost, Hold and
Let's say you wt to detist a frozen
casserole for H minutes, hold for
10 minutes and then Time Cook for
25 minutes. Here's how to do it:
The display shows ": O" and
"ENTER DEF TIME" flashes.
Step
3: Touch pads 1,5,0 and O for
appears on display. (Defrosting is
automatically set on power level 3
but can be changed by touching the
POWER LEVEL pad and the
desired power level.)
Step
4: Set standing or hold time
by touching MIN/SEC TIMER. The
display shows ": O" and "ENTER
for ten minutes. "10:00" appears on
display and "TIME" flashes.
24
Step
7: Touch 2,5,0 and O for
twenty-five minutes of cooking time.
"COOK TIME" flashes and
"25 :00" appears on display.
Touch ST~. "DEFT~E"
and "15:00" counting down show
on display. As each function is
automatically performed, oven
display shows instructions entered
and the function.
Step
9: When time is up, the oven
signals and flashes "End:'
Questions and Amwers
Q. What will happen if I
accidentally reverse my defrost,
hold and cook instructions?
A.
The oven will automatically
rearrange your program. Defrosting
will always come first, then hold,
and then the cooking function.
Q. Can I defrost and hold only?
A. Yes.
Sometimes you may only
want to defrost a food, hold it, and
cook it later. All you need to do is
program in Defrost and amount of
time. Then program Hold and the
amount of time. Be sure to put the
thawed dish in the refrigerator
promptly.
NOTE: Let foods remain at room
temperature only as long as safe.
Times will vary.
Q. I programmed my oven for
a specific defrosting time but it
defrosted longer than necessary.
What happened?
A.
When instructions conflict,
the oven carries out the last
instruction. You may have set the
oven to Defrost for 4 minutes,
Hold/Time for 2 minutes, and then
Defrost for 6 minutes. In this case,
the oven would Defrost for 6
minutes and Hold/Time for 2
minutes.
Advertisement
Table of Contents
