Table of Contents
Advertisement
Honeywell • 24
LonWorks interface
nciNmlSpeed
This configuration property is used to provide the nominal speed of the motor in RPM. This val-
ue is necessary to determine the minimum and maximum speeds for the motor, based on the
configuration properties nciMinSpeed, nciMaxSpeed (entered as a percentage of nominal
speed).
nciNmlFreq
This configuration property is used to provide the nominal frequency for the motor.
nciRampUpTm
Defines the acceleration time for drive. The valid range is 0.0 to 6,553.4 sec (0.1 sec).
nciRampDownTm
Defines the deceleration time for drive. The valid range is 0.0 to 6,553.4 sec (0.1 sec).
nciDrvSpeedScale
This configuration property is used as the default value for nviDrvSpeedScale. This value will
be adopted at power-up and in case no input variable within the specified Receive Heartbeat
time is received.
Advertisement
Table of Contents
