Advertisement
H
G
Embossing the Label
Avoid turning the embossing wheel at the same time you are
!
squeezing the embossing handle. This can damage the character wheel.
To emboss a label
1. Turn the character selection wheel (G) until the desired letter is
centered in the window (H).
2. Squeeze the embossing handle (F) firmly.
3. Release the embossing handle fully before selecting the
next character.
To add space between words
♦
Squeeze embossing handle (F) half-way (one click) or turn the label
advance knob clockwise (one click per space).
6
F
Advertisement
