Attaching The Cover; Finishing Component Removal - Fujitsu LIFEBOOK N532 Operating Manual

Removing and installing components during servicing

Attaching the cover

2
2
3
2
2
1
2
► Place the cover in the correct mounting position (1).
► Secure the screws for the cover of the hard disk service compartment (2).
► Secure the screw for the cover of the memory service compartment (3).
► Insert the battery (see Chapter "Inserting battery", Page 31).

Finishing component removal

After you have removed or changed the system components as you required, please
prepare your device for operation again as follows:
► Install the battery again (see "Inserting battery", Page 31).
► Turn the notebook the right way up again and place it on a flat surface.
► Reconnect the cables that you disconnected before.
58 Fujitsu Technology Solutions