Preparing To Remove Components - Fujitsu LIFEBOOK N532 Operating Manual

Preparing to remove components

If you are going to remove or change system components, prepare for the removal as follows:
Please observe the safety information in chapter
Remove the power plug from the mains outlet !
► Switch the device off.
The device must not be in energy-saving mode !
► Close the LCD screen.
► Remove all the cables from the device.
► Turn the device over and place it on a stable, flat and clean surface. If necessary, lay an
anti-slip cloth on this surface to prevent the device from being scratched.
► Remove the battery (see
Fujitsu Technology Solutions
Removing and installing components during servicing
"Removing the battery", Page
"Important notes", Page
30).
12.
53