Casio CTK-8IOin User Manual page 51

NAVIGATE CHANNEL (Default: 4)
When messages are received from a computer for play on
this keyboard, the navigate channel is the channel whose note
data appears on the display. You can select one channel from
01 to 16 as the navigate channel. Since this setting lets you
use the data on any channel of commercially available SMF
data to light on the on-screen keyboard guide, you can
analyze how different parts of an arrangement are played.
1
Press the TRANSPOSE/FUNCTION button until the
NAVIGATE CHANNEL screen appears.
N a v i . C h
2
Use the [+], [–], and the number buttons [0] through
[9] to change the channel number.
Example: To specify channel 2
N a v i . C h
To turn off specific sounds before playing back tune data
that is being received
<<Navigate channel on/off>>
1
While playing tune data, press the RIGHT/TRACK
2 button.
• This cuts the sound of the navigate channel, but on-
screen keyboard guide keys continue to light in
accordance with the channel's data as it is received.
Press RIGHT/TRACK 2 button again to turn the
channel back on.
<<Next lower channel from navigate channel on/off>>
1
While playing tune data, press the LEFT/TRACK 1
button.
• This cuts the sound of the channel whose number is
one less than the navigate channel, but on-screen
keyboard guide keys continue to light in accordance
with the channel's data as it is received. Press LEFT/
TRACK 1 button again to turn the channel back on.
Example: If the navigate channel is channel 4, the above
operation turns off channel 3.
CTK810IN_e_42-50.p65 49
Connection to a Computer
LOCAL CONTROL (Default: On)
oFF: Anything played on the keyboard is output as a message
from the USB port, without being sounded by the
internal sound source.
• Note that no sound is produced by the keyboard if LOCAL
CONTROL is turned off and no external device is
connected.
1
Press the TRANSPOSE/FUNCTION button until the
LOCAL CONTROL screen appears.
Example: When LOCAL CONTROL is on
L o c a l
2
Use the [+] and [–] or [0] and [1] buttons to turn
the setting on and off.
Example: To turn LOCAL CONTROL off
L o c a l
ACCOMP OUT (Default: Off)
on: Auto Accompaniment is played by the keyboard and
the corresponding message is output from the USB port.
oFF: Auto Accompaniment messages are not output from the
USB port.
1
Press the TRANSPOSE/FUNCTION button until the
ACCOMP OUT screen appears.
Example: When ACCOMP OUT is off
A c o m
2
Use the [+] and [–] or [0] and [1] buttons to turn
the setting on and off.
Example: To turn ACCOMP OUT on
A c o m
07.4.10, 3:47 PM
O u t
p
O u t
p
E-49