Saving The Settings - Radio Shack MD-1700 Owner's Manual

keyboard has 19 chord conversion tables to
make the chord sound more natural. Select
the table using the number keys (
"Chord Conversion Table" on Page 53.
Note: This setting does not work for rhythm
parts. -- -- appears when you select this
menu item while you are on Channel 10, and
you cannot enter any setting.
Break Point: specifies the break point. Once
set, any chord above the break point is
played in the next lower octave when you
use CONCERT CHORD, FINGERED, or
FULL RANGE.
Note: This setting does not work for rhythm
parts. -- -- appears when you select this
menu item while you are on Channel 10, and
you cannot enter setting.
Quantize: determines the quantize value af-
ter recording. The timing of notes previously
recorded can be matched with the note tim-
ing of this setting.
Select any one of the following:
Channel Quantize Setting
4 Quarter notes
th
8 8 notes
8T Triplet 8th notes
th
16 16 notes
16T Triplet 16th notes
nd
32 32 notes
32T Triplet 32nd notes
th
64 64 notes
Note: The length of the last note in the pat-
tern might be changed by this setting.
Quantize Execute: executes the quantize
setting. Qtz Exe? appears. Press
Complete appears. Otherwise, press
38

Saving the Settings

After you have finished creating a pattern,
– ). See
0 18
follow these steps to save the pattern.
1. If you were in pattern edit mode, select
Escape
to pattern create mode.
2. Press
3. Press
Or, to exit the pattern sequencer mode
without storing the pattern, press
Delete?
without saving the work area contents,
or press
tion and return to the pattern sequencer
mode.
4. Use the number buttons (or
ify the rhythm number location (between
120 and 129), then press
5. Press
rhythm name input area.
6. Press
6
or
space, then press
If the rhythm pattern exists in the specified
location,
replace the pattern or
and enter a different location number.
After you replace the rhythm pattern,
plete appears briefly, then the keyboard
exits the pattern sequencer mode.
.
YES
.
NO
Recording
, then press
ENTER
twice.
PATTERN Save?
to save the pattern.
YES
appears. Press
YES
to cancel the saving opera-
NO
+
ENTER
6 7
or to move the cursor to the
or to select the characters and
+ –
7
to move the cursor to the next
.
ENTER
Replace? appears. Press
to return to Step 6
NO
to go back
appears.
.
NO
to exit
/ to spec-
–)
.
to
YES
Com-