Connecting A Usb Cable - Bosch CCS 900 Ultro Installation And Operating Manual

CCS 900 Ultro
5.11

Connecting a USB cable

Use the optional USB cable to connect the CU (1) to a PC. Data can then be downloaded from
the CU to the PC (CCS-CURD only). See section 7 for more information.
CAUTION!
Do not connect the USB cable and audio output/input to the same PC, otherwise the system
will not work.
CAUTION!
Do not disconnect the USB cable or shut down the Control Unit without following the PC
disconnection procedures.
Bosch Security Systems B.V. Installation and Operating Manual
Installation | en 15
IOM_CCS900 | V1.0 | 2010.06