Binding - GE 82-POE User Manual

Chapter 6: Command Line Interface

Binding

Let device that has specific IP address and MAC address can use network. We can set
specific IP address, MAC address, VLAN id and port id to bind, and device can cross
switch if all conditions match.
SIP/SMAC binding commands
bind
Description:
Enable binding function.
no bind
Description:
Disable binding function.
no bind
Description:
Delete Binding group.
Syntax:
no bind <1-220>
Parameters:
<1-220> specifies the group id.
e.g. no bind 1
GE-DS-82 and 82-PoE Ethernet Managed Switch User Manual 199