Stp/Rstp Commands - GE 82-POE User Manual

show filter
Description:
Display filter MAC address table.

STP/RSTP Commands

[no] spanning-tree
Description:
Enable or disable spanning-tree.
spanning-tree forward-delay
Description:
Set spanning tree forward delay used, in seconds.
Syntax:
spanning-tree forward-delay <4-30>
Parameters:
<4-30> specifies the forward delay, in seconds. Default value is 15.
NOTE: The parameters must enforce the following relationships:
2*(hello-time + 1) <= maximum-age <= 2*(forward-delay - 1).
spanning-tree hello-time
Description:
Set spanning tree hello time, in seconds.
Syntax:
spanning-tree hello-time <1-10>
Parameters:
<1-10> specifies the hello time, in seconds. Default value is 2.
NOTE: The parameters must enforce the following relationships:
2*(hello-time + 1) <= maximum-age <= 2*(forward-delay - 1).
GE-DS-82 and 82-PoE Ethernet Managed Switch User Manual
Chapter 6: Command Line Interface
179