Table of Contents
Advertisement
3.CONFIGURATION
3.1 DEFAULT CONFIGURATION
ADSL MODEM has pre-configured with the following VCI/VPI. The default dial-up mode is bridge
encapsulation. For bridge mode, no need to configure any more parameter. However, the third party dial-up
software is needed for connection with the Internet
3.2 COMPUTER CONFIGURATION
The default IP address for ADSL MODEM is: 192.168.1.1; The Subnet Mask is：255.255.255.0. Users can
configure ADSL MODEM through an Internet browser. ADSL MODEM can be used as gateway and DNS
server; users need to set the computer's TCP/IP protocol as follow:
1、 Set the computer IP address at same segment of ADSL MODEM, such as set the IP address of the
network card to one of the "192.168.1.2"～ "192.168.1.254".
2、 Set the computer's gateway the same IP address as the ADSL Modem's.
3、 Set computer's DNS server the same as ADSL Modem's IP address or that of an effective DNS server.
3.3 ADSL MODEM CONFIGURATION
3.3.1 LOG IN
Open the browser; input http://192.168.1.1 at the address column. Press "Enter" key then the entry dialog
box will show up as Figure 3.1. Input "username" and "password" (capital sensitive), then press Enter.
Tabel 3.1
Link Name
VPI
pvc_0_32
32
pvc_8_35
35
pvc_0_35
35
pvc_8_81
81
Page 6
DSL Gateway/Router — User Manual
VCI
0
8
0
8
Total 18 Pages
Advertisement
Table of Contents
