Changing Midi Settings; Notes About The Midi Implementation Chart - Optimus Concertmate 980 Owner's Manual

42-4038.fm Page 27 Thursday, August 12, 1999 8:50 AM
Here is the data that can be received
with this keyboard and the correspond-
ing control number.
Effect
Modulation
Volume
Pan
Hold1 (Sustain)
The Concertmate 980 can send Hold1
Control Change data only when you con-
nect a sustain pedal and press it.
CHANGING MIDI
SETTINGS
The Concertmate 980 lets you change
two MIDI parameters, Tone Map and
Keyboard Channel.
Keyboard Channel — sets the channel
for sending MIDI data to an external de-
vice (Default: 01). The Concertmate 980
receives MIDI data on channels 1 through
4 and 10 only. The data received on other
channels are ignored. For transmission of
MIDI data, you can use any of 16 chan-
nels.
1. Repeatedly press
until
TUNE/MIDI Keybd Ch
2. Within 5 seconds, press
select the channel you want.
Tone Map —sets the range of program
change values received/recognized by
this keyboard.
Control
1. Repeatedly
Number
TUNE/MIDI
pears.
1
2. Within 5 seconds, press
7
lect the setting you want.
10
N
64
allows receipt of 0 to 99 program
changes. Each program change
corresponds to one of the key-
board's prerecorded tones.
G
setting allows receipt of all 0 to 127
program changes. Any data over
100 are translated to the closest
tone the Concertmate 980 has. See
"Note Table" on Page 34 for details.
Select
MIDI data from an external device.
NOTES ABOUT THE MIDI
IMPLEMENTATION
CHART
The "MIDI Implementation Chart" on
Page 36 illustrates the details of the key-
board's MIDI function. An O in the chart
means that the keyboard has this fea-
TRANSPOSE/
ture; X means it does not have this fea-
appears.
ture. The following notes explain what
the keyboard can do.
– or + to
press
TRANSPOSE/
until TonMap=N
: Normal Tone Map. This setting
: General MIDI Tone Map. This
G when you listen to General
ap-
or to se-
– +
27