For Network Interface Cable Users; To 9.2 - Brother MFC-8420 Quick Setup Manual

Step 2

For Network Interface Cable Users

For Mac OS
Make sure that you have completed the instructions from Step 1 "Setting Up
the Machine" on pages 2 - 8.
1
Make sure that the NC-9100h (Network
Print/Fax Server) is installed into the MFC.
(See Optional accessories in Chapter 23 of
the User's Guide.)
2
Switch off and unplug the MFC from the AC
outlet and disconnect it from your Macintosh
if you already connected an interface cable.
3
Turn on your Macintosh
4
Insert the supplied CD-ROM for Macintosh
into your CD-ROM drive.
5
Double-click the Start Here icon to install
the printer, scanner and PC-FAX Send
drivers. If the language screen appears
select your language.
45
Installing the Driver & Software
®

8.6 to 9.2

®
.
6
Click Install next to the MFL-Pro Suite for
your country.
7
Select Network Interface, and then click
Install.
8
After the installation is completed, restart
your Macintosh
9
Connect the network interface cable to the
printer, and then connect it to a free port on
your hub.
®
0
Turn on the MFC by plugging in the power
cord. Turn the power switch on.
®
.