Fuel - Lowrance HDS-8 Operation Manual

Settings

Fuel

Used to input fuel data like engine/tank configuration,
fuel tank capacity and engine calibration. Your unit uses
that data to calculate the overall fuel performance of your
vessel. To access the Fuel menu, select Fuel from the
Settings menu and press enTeR.
Refuel
Controls engine calibration and is used to input the amount of fuel added to the
tank(s). Engines must be calibrated with your fuel tanks to get correct readings on
fuel economy, fuel used, etc.
Set to Full
checkbox: check
this box when you
fill up your tank
It is important to enter the amount of fuel added to your tank(s) each time fuel
is added. That ensures the correct fuel data is used in the unit's fuel performance
calculations.
To input fuel added:
1. Select Refuel from the Fuel menu and press enTeR.
2. Use keypad to select the Amount Added window and press enter.
The Amount Added text box will appear.
3. Use the keypad to input the amount of fuel added and press
enTeR.
Refuel menu
98
Fuel menu
Amount Added
text box: Input
amount of fuel
added here