Program Schedule Override Temporary/Permanent - Honeywell PRO 4000 Series User Manual

Program schedule override (temporary)
Press or to immediately adjust
s t
the temperature. This will temporarily
override the temperature setting for the
current time period.
The new temperature will be maintained
only until the next programmed time
period begins. For example, if you want
to turn up the heat early in the morning,
it will automatically be lowered later,
when you leave for the day.
To cancel the temporary setting at any
time, press RUN.
Note: Make sure the thermostat is set
to the system you want to control (heat
or cool).
Program schedule override (permanent)
Press HOLD to permanently adjust
the temperature. This will override
the temperature settings for all time
periods.
The "Hold" feature turns off the program
schedule and allows you to adjust the
thermostat manually, as needed.
Whatever temperature you set will be
maintained 24 hours a day, until you
manually change it, or press RUN to
cancel "Hold" and resume the program
schedule.
This feature helps prevent damage to
the compressor in your air conditioning
or heat pump system.
Note: Make sure the thermostat is set
to the system you want to control (heat
or cool).
4
Temporary
Set T o
70
6 : 30
AM
Set T o
75
6 : 30
AM
Hold
Set T o
70
6 : 30
AM
Set T o
75
6 : 30
AM