Download Print this page

Cuisinart Buona Tazza Quick Reference Manual

Single serve espresso machine
Hide thumbs Also See for Buona Tazza:

Advertisement

TROUBLE SHOOTING CONTINUED
Problem: Coffee is too hot.
Solution:
Press the HOT
button and wait until the light is steady.
Problem: Coffee is not hot enough.
Solution:
• Press the HOTTER SETTING
button and wait until the light is steady.
• If still not hot enough at hotter setting, use the manual button to despense a
cup of water to pre heat, then make your espresso as indicated on page 6.
Problem: SHORT
/LONG
buttons flash quickly; all buttons are
non-functional; or some buttons are off.
Solution:
• That indicates the coffee boiler detects low or high temperature. Recover the
unit by unplugging it and let the unit cool down for approximately 10 minutes.
Problem: Short
/Long
/Manual/
Steam
buttons flash.
Solution:
Refill the water reservoir or make sure it is properly engaged on the base.
Problem: Steam
/Cappuccino
Solution:
Install or properly engage the milk tank with no capsule in the brew head.
Buona Tazza
Single Serve Espresso Machine
IMPORTANT!
Do not throw away. Read before operating your new food processor.
Keep for further reference.
For more helpful hints see Instruction Booklet
/Latte
buttons are non-functional or off.
Buona Tazza
BEFORE FIRST USE
1. Remove lid from water reservoir. Lift off base with handle and fill with fresh cold water. Replace reservoir
and lid. Using tracks as guide, slide back into position and push down firmly.
2. Insert plug into power outlet and press power button once. Controls will flash as unit preheats; lights turn
steady when ready.
3. Place a mug on drip tray, then press Manual
again to stop flow.
4. Place espresso cups on warming plate. Lights will all be on and steady. The machine is now ready to use.
1.
Use lever to open brew head.
3.
Place an espresso cup on
the fold-down tray.
PG-30769
QUICK REFERENCE GUIDE
Single Serve Espresso Machine
button and dispense water for 5 to 10 seconds. Press
MAKING ESPRESSO
2.
Insert an illy iperEspresso capsule
and close brew head.
4.
Press single
or double
espresso button to brew.

Advertisement

loading

Summary of Contents for Cuisinart Buona Tazza

  • Page 1 QUICK REFERENCE GUIDE TROUBLE SHOOTING CONTINUED Problem: Coffee is too hot. Solution: Buona Tazza Single Serve Espresso Machine ™ • Press the HOT button and wait until the light is steady. Problem: Coffee is not hot enough. BEFORE FIRST USE Solution: • Press the HOTTER SETTING...
  • Page 2 TROUBLE SHOOTING TEMPERATURE CONTROLS Problem: Machine does not have power. In less than 10 seconds will Solution: Hotter is the default setting. To select stop flashing to signal temperature • Plug the machine into an independent outlet. Hot, press the button. is reached. • Make sure the machine is securely plugged in. • Reset your home’s circuit breaker. • Confirm the power has been turned on and the controls are illuminated.