Cuisinart Buona Tazza Quick Reference Manual

TROUBLE SHOOTING
Problem: Machine does not have power.
Solution:
Problem: Machine will not brew.
Solution:
Problem: Chlorine or mineral taste in coffee.
Solution:
Problem: Doesn't brew a full cup.
Solution:
Problem: The used capsule will not fall into the
capsule container.
Solution:
Problem: I want to reset the coffee programming.
Solution:
Problem: The controls lights are not as bright as
they were.
Solution:
Buona Tazza Super Automatic Single Serve
™
Espresso, Caffè Latte & Cappuccino Maker
IMPORTANT!
Do not throw away.
Read before operating your new food processor.
Keep for further reference.
For more helpful hints see Instruction Booklet
Problem: Machine turned off.
Solution:
Problem: Coffee is too hot.
Solution:
HOT
Problem: Coffee is not hot enough.
Solution:
HOTTER SETTING
Problem: SHORT /LONG buttons flash
quickly; all buttons are non-functional; or some
buttons are off.
Solution:
Problem: CAPPUCCINO /LATTE buttons
flash quickly; all other buttons are off; or all
buttons are non-functional.
Solution:
Problem: Short /Long /Manual/
Steam buttons flash.
Solution:
Problem: Steam /Cappuccino /Latte
buttons are non-functional or off.
Solution:
PG-30765
QUICK REFERENCE GUIDE
Buona Tazza ™ Super Automatic Single Serve
Espresso, Caffè Latte & Cappuccino Maker
BEFORE FIRST USE
1. Remove lid from water reservoir. Lift off base with handle and fill with fresh cold water. Replace reservoir and lid. Using tracks
as guide, slide back into position and push down firmly.
2. Insert plug into power outlet and press power button once. Controls will flash as unit preheats; lights turn steady when ready.
3. Place a mug on drip tray, then press Manual button and dispense water for 5 to 10 seconds. Press
4. Place espresso cups on warming plate. Lights will all be on and steady. The machine is now ready to use.
MAKING ESPRESSO
1.
Use lever to open brew head.
3.
Place an espresso cup on the
fold-down tray.
TEMPERATURE CONTROLS
1.
Hotter is the default setting. To
select Hot, press the button.
3.
Use buttons to select the type of
espresso drink you want to brew.
again to stop flow.
2.
Insert an illy iperEspresso
capsule and close brew head.
4.
Press single or double
espresso button to brew.
2.
In less than 10 seconds or will stop
flashing to signal temperature is reached.
ENERGY SAVE AND AUTO-OFF
After 30 minutes, machine switches to sleep mode and lights dim.
Press any button to start preheat mode. When lights are all steady,
machine is ready to operate.
Following the Energy Saver cycle, if the espresso machine is not
used for another 30 minutes, it will turn off. Pressing the power
button will turn it back on.