Table of Contents
Advertisement
Nixdorf OCIA Interface
The Nixdorf OCIA barcode also programs the following prefixes for each sym-
bology:
Serial Wedge
The 3800/3900 uses true and TTL signal levels to wedge into an RS-232 serial
network. Use 3800/3900 serial wedge cables only to prevent damage to the
scanner. Refer to the serial interface programming (pages
the baud rate and communications protocol.
To set up the serial wedge terminal ID, find the terminal ID in the Supported Ter-
minal Chart and follow the instructions on
want the scanned data to transmit. Port 1 corresponds to P1 on the output
cable and Port 2 corresponds to P2 on the output cable. Choosing Both sends
scanned data to P1 and P2. Default = P1.
1 - 12
Symbology
Interleaved 2 of 5
Code 128
Nixdorf OCIA Interface
Symbology
EAN/UPC with Addenda
Code 39
Interleaved 2 of 5
2 of 5
Code 128
Prefix
42 32
42 33
Prefix
44 4B
44 49
44 48
44 47
44 4A
page
2-1. Set the port to which you
2-7
to 2-11) to set
Advertisement
Table of Contents
