When Using Rcs3211; Running Hot Water - Bosch BC3200RA Owner's Manual

When using RCS3211

Running Hot Water

Priority
Burner on
On this Display
1
Priority
Burner on
2
Priority
Burner on
Previous set temperature
WARNING
Be especially careful if using hot water after previously using water at 60°C or above to prevent scalding.
WARNING
This is to prevent scalding if the temperature rises. Conversely, if the temperature reduces or the
power switch is turned "off", the user may be upset when the water suddenly becomes much colder.
Operating Instructions
Press the
button to turn it
"On".
Check
Turn on hot water.
(Eg.: 40°C)
Whenever using the hot water, such as when using the shower,
check the temperature shown on the remote controller first, and
then test the hot water temperature by hand.
While the shower is being used, no one other than the user
should change the temperature, the power switch must not be
turned "off", when using sub remote controller.
Operation
* Hot water supply temperature
* This is lit during combustion.
Description
is displayed.
< Display details >
Priority
Burner on
Here
21 21