Operation - Robitussin DH-832 Series Owner's Manual

• Position the Water Tank in the humidifier and push into place. Some water will
empty into the base.
• Once the filled tank has been positioned, do not attempt to move the humidifier. If
it has to be moved, unplug the humidifier and remove the water tank first.
CAUTION: DO NOT POUR WATER INTO THE GRILLE ON THE POWER BASE.
DOING SO MAY DAMAGE THE HUMIDIFIER OR CAUSE PERSONAL INJURY.
P O W E R
CAUTION: DO NOT PLUG IN THE HUMIDIFIER WITH WET HANDS AS AN
ELECTRICAL SHOCK COULD OCCUR.
• With the power switch in the OFF position, plug the filled humidifier into a polar-
ized 120V outlet. DONOT FORCETHE POLARIZEDPLUG INTO THEOUTLET; it will
only fit one way.
H U M I D I T Y C O N T R O L
• Set the fan speed CONTROL to the desired position
(Fig. 4).
HIGH: For fast humidifying
NORMAL: For quieter operation
NOTE: The length of time your humidifier runs will vary
depending on the quality of construction, room size,
and insulation of your room and house, as well as the
fan speed.
• Turn the humidifier OFFif the humidity level feels too moist or you notice
condensation forming on the walls and/or windows.
• ALWAYSbesure to empty any unused water ni the Remove and Rinse™ Tray
and/or Water Tank each time you refill the water tank or finish using the
humidifier.
FILLING CONTINUED

OPERATION

Fig. 4