Parking Brake; Blade Switch; Ignition Switch - Husqvarna PZ 72 Owner's Manual

Parking Brake

the parking brake is found on the left of the
machine. Pull the lever backward to activate the
brake and forward to release it.
IMPORTANT INFORMATION
The machine must stand absolutely still
when applying the parking brake. Always
set the parking brake before dismounting.
Release the parking brake before moving
the mower.

Blade Switch

to engage the mower deck, pull the blade switch
knob out. the mower blades are disengaged when
the knob is pressed down fully.

Ignition Switch

the ignition switvch is placed on the control panel
and is used to start and stop the engine. Push in
and turn the key clockwise to start the engine.
CONTROLS
Parking brake
Blade switch
Ignition switch
8065-006
8065-004
8065-058
21