Getting Started; Making Settings Using The Setup Navigator Menu - Pioneer BDP-450 Operating Instructions Manual

Chapter 3
03

Getting Started

Making settings using
the Setup Navigator
menu
Be sure to perform these settings when using the player
in the following situations.
• When you use the player for the first time.
• After Initial Setup format.
• After updating the player's software.
Caution
• Before turning on the power, check that the
connections between the player and other devices are
correct. Also, turn on the power of the devices
connected to the player before turning on the player's
power.
• When using a Pioneer Flat Screen TV or front
projector compatible with the Control function, set
Control to On on the connected device before turning
on the player's power.
BDP-450
1 Turn on the TV's power and switch the input.
See the TV's operating instructions for the details of
operating the TV.
2 Turn on the player's power.
STANDBY/ON.
Press
Check that the Setup Navigator menu is displayed.
24
En
displayed
Menu, select Initial Setup
Start, then press ENTER.
3
Press ENTER.
• Setup Navigator starts.
4
Use
When a Pioneer Flat Screen TV that is compatible with
Control function is connected to this player's HDMI OUT
terminal, language settings are imported from the
Pioneer Flat Screen TV's language settings before Setup
Navigator begins.
5
connected TV.
Use
6
TV.
BDP-150
Use
7
Press ENTER.
• Setup Navigator finishes and the setting is stored.
• Press
If the Setup Navigator menu is not
Press HOME MENU to display the Home
Start Setup Navigator.
Select the OSD language.
to select, then press ENTER.
/
Select the appropriate output resolution for the
/ to select, then press ENTER.
Select the appropriate aspect for the connected
/ to select, then press ENTER.
Close the Setup Navigator menu.
RETURN to go back to the previous
screen.
Setup Navigator