Error Codes Of Auto-Equalizing Function - Pioneer MEH-P9100R Operation Manual

Error Codes of Auto-equalizing Function

When correct measurement of car interior acoustic characteristics is not possible with the
Auto-equalizer, the following error messages are displayed. After checking, try again.
Display
Error Check Mic
Error Check Speakers
Error Check System
Cause
Microphone is not connected.
The microphone cannot pick up
the measuring tone of the front
and rear speakers.
The surrounding noise level is too
high.
Remedy
Plug in the supplied microphone
securely into the jack.
Confirm that the speakers are
connected correctly.
Set the input level setting of the power
amp connected to the speakers
correctly.
Correctly set the microphone.
Stop your car in a place that's as quiet
as possible, and switch off the engine
and air conditioner or heater.
Correctly set the microphone.
60