Calibrating The Screen; Checking Battery Status; Mc9190-G Strap - Motorola MC9190-G User Manual

1 - 6 MC9190-G User Guide
When the MC9190-G is powered on for the first time, it initializes its system. The splash screen appears for a short
period of time.

Calibrating the Screen

To calibrate the screen so the cursor on the touch screen aligns with the tip of the stylus:
Using the stylus carefully press and briefly hold the tip of stylus on the center of each target that appears on the
1.
screen.
NOTE To re-calibrate the screen at anytime, press FUNC + ESC on the MC9190-G to launch the calibration
screen application.
Repeat as the target moves around the screen or press ESC to cancel.
2.

Checking Battery Status

To check the charge level of the main battery or backup battery:
•
On Windows CE 6.0 devices: tap
window.
•
On Windows Mobile 6.5 devices: tap
To save battery power, set the MC9190-G to turn off after a specified number of minutes.

MC9190-G Strap

The strap may be moved to either the left or right side of the MC9190-G to suit user preferences.
To reposition the strap:
Slip the button through the end loop and remove from the handle.
1.
Open strap loop and slide the handstrap through the loop.
2.
Slide the loop out of the connector post.
3.
Reverse the procedure to re-attach the strap. Two strap connectors are provided on the MC9190-G's main
4.
body. The handstrap may be attached to either connector.
> >
Start Settings Control Panel
> >
Start Settings System
> to display the
Power Battery Status
> to display the
Power Power
window.