Final Transmission Oil - Yamaha VINO XC50Z Owner's Manual

Final transmission oil<IXE>
PERIODIC MAINTENANCE AND ADJUSTMENT

Final transmission oil

The final transmission case must be
checked for oil leakage before each ride.
1
If any leakage is found, have a Yamaha
dealer check and repair the scooter. In
2
addition, the final transmission oil must
be changed as follows at the intervals
specified in the periodic maintenance
3
and lubrication chart.
1. Start the engine, warm it up by
4
riding the scooter for several min-
utes, and then stop the engine.
5
2. Place the scooter on the
centerstand.
3. Place an oil pan under the final
6
transmission case to collect the
used oil.
7
8
9
EAUT1561
2
ZAUM00**
1. Final transmission oil filler bolt
2. Final transmission oil drain bolt
4. Remove the oil filler bolt and drain
bolt to drain the oil from the final
transmission case.
5. Install the final transmission oil
drain bolt, and then tighten it to the
specified torque.
Tightening torque:
Final transmission oil drain bolt:
13 Nm (1.3 m • kgf, 9.4 ft • lbf)
6. Refill with the specified amount of
the recommended final transmis-
sion oil, and then install the oil filler
bolt and tighten it to the specified
1
7. Check the final transmission case
6-46 6-10
torque. WARNING! Make sure that
no foreign material enters the fi-
nal transmission case. Make sure
that no oil gets on the tire or
wheel.
[EWA11311]
Tightening torque:
Final transmission oil filler bolt:
23 Nm (2.3 m • kgf, 16.6 ft • lbf)
Recommended final transmission oil:
See page 8-1.
Oil quantity:
0.1 L (0.11 US qt, 0.08 Imp.qt)
for oil leakage. If oil is leaking,
check for the cause.
EAU1722A