IBM System x3200 Installation Manual page 66

52
System x3200 Type 4362 and 4363: Installation Guide
Table 4. Abbreviated list of POST error codes (continued)
v Follow the suggested actions in the order in which they are listed in the Action
column until the problem is solved.
v See the parts listing in the Problem Determination and Service Guide to determine
which components are customer replaceable units (CRU) and which components
are field replaceable units (FRU).
v If an action step is preceded by "(Trained service technician only)," that step must
be performed only by a trained service technician.
Error code Description
1162 Serial port error
178x Fixed disk error.
Note: x is the drive that has the
error.
Action
1. Run the Configuration/Setup
Utility program and make sure
that the serial port settings are
correct.
2. (Trained service technician
only) Replace the system
board.
1. Run the hard disk drive
diagnostic tests on drive x (see
"Running the diagnostic
programs" in the Problem
Determination and Service
Guide on the IBM System x
Documentation CD).
2. Reseat the following
components, depending on the
server model:
v Hot-swap models: Hard disk
drive
v Simple-swap models:
a. Hard disk drive x
b. Hard disk drive x cable
3. Replace the following
components one at a time,
depending on the server
model, in the order shown,
restarting the server each time:
v Hot-swap models:
a. Hard disk drive x
b. Hard disk drive
backplane
v Simple-swap models:
a. Hard disk drive x
b. Hard disk drive x cable
4. (Trained service technician
only) Replace the system
board.