Welcome; Safety First; Identify Your Set-Top - Cisco RNG200 User Manual

Welcome

®
The Cisco RNG200 and RNG200N High-Defi nition Digital-Only Set-Tops with Multi-Stream CableCARD
provide high-defi nition (HD) capability and broadband digital video services.
Follow the instructions in this guide to install the DVR set-top, to become familiar with the buttons on the front panel,
and to access your cable services. Then, enjoy the features of the set-top and change the way you watch TV.
The consumer support website provides news and information about this product. For more information, please refer to
http://www.cisco.com/web/consumer/support/index.html

Safety First

Before using the set-top, read the Important Safety Instructions section of this guide.

Identify Your Set-Top

If the set-top requires troubleshooting in the future, your service provider may ask for the serial numbers of the
set-top and M-Card module.
The set-top serial number label is on the back panel of the set-top; the serial number begins with "STB SN" and is
located in the upper left corner of the bar code.
The M-Card serial number label is on the M-Card module slot cover; the serial number begins with "M-CARD SN" and
is located in the upper left corner of the bar code.
Use this space to record the set-top serial number: ____________________________________________________
Use this space to record the M-Card module serial number: _____________________________________________
Set-Top
Serial
Number
M-Card
M-CARD SN: PKCPTMFDV
Module
Serial
M-CARD MAC: 001BD746C7CB
Number
STB SN: SABNFSRVG
eCM MAC: 001868C16907
STB RF MAC: 001868C16906
T13959
™ ™
(M-Card )
1