Light-Measuring Mode Setting - Sanyo Xacti VPC-HD1AEX Instruction Manual

LIGHT-MEASURING MODE SETTING

You can select from 3 types of light-measuring modes.
Multi-section light-measuring:
The light is modulated after sampling from multiple areas of the entire
shooting screen.
Center-weighted light-measuring:
The light is modulated for the entire image after measuring from mostly the
center area.
Spot light-measuring:
You can compose the picture and capture the image after first modulating the
light only at the center spot of the monitor.
1
Display the PAGE 2 Shooting Setting Screen (page 65).
2
Select the light-measuring mode (EXP MEASURE) menu.
n: Multi-section light-measuring
W: Center-weighted light-measuring
Y: Spot light-measuring
3
Select the desired light-measuring
mode from the light-measuring
mode (EXP MEASURE) menu, and
press the SET button.
h This completes the light-measuring
mode setting.
h When spot light-measuring is
selected, the light-measuring spot
mark appears in the center of
the monitor.
40
F3.5
1/40
Light-measuring spot mark
English
00:02:47
82