Troubleshooting - Sanyo Xacti VPC-HD1AEX Instruction Manual

TROUBLESHOOTING

Before taking your camera to the repair shop, check the following table for a
possible solution to the problem.
CAMERA
No power.
Power
The camera
turns off by
itself.
An image is
not captured
when the still
image
shooting
Shooting button or video
clip recording
button is
pressed.
173
English
Problem
The battery
pack is dead.
The battery
pack has not
been inserted
correctly.
The power
save function
is operating.
The power is
not turned on.
Cause
Recharge the
battery pack, or
replace with a
new battery
pack. Or
connect the AC
adaptor
(supplied).
Reinsert the
battery pack,
making sure to
orient it
correctly.
Turn on the
camera again.
If the power
save function
was activated,
turn on the
camera before
shooting.
If the camera
was turned off,
press the ON/
OFF button to
turn it on.
Reference
Action
page
22, 26,
30, 31
29
31