Using The Controls 3 Speed Combo Models - Maytag AAV4000AW Series Service Manual

Using the Controls - 3 Speed Combo Models
STEP 1
Select Water Level
Determine the selected setting based on clothes load
size. Selection should provide sufficient water to permit
clothes to circulate freely during agitation.
It may become necessary, due to bulky fabrics, to
adjust the water level after agitation begins. To adjust
the water level, turn the control to reset and then back
to the desired setting.
WATER LEVEL SETTING
Ex. Low
(select models)
Small
Medium
Large
Note:
Items must circulate freely for best results.
3
B–52
All manuals and user guides at all-guides.com
Select Wash/Rinse Temperature
Your washer gives you a choice of hot, warm or cold
water for washing and cold or warm water (select
models) for rinsing. Use the chart below as a guide.
LOAD SIZE
1/4 Full
1/4 – 1/2 Full
1/2 – 3/4 Full
3/4 – Full
16026502
STEP 2
WASH/RINSE
TEMPS
White and heavily soiled, color-fast
Hot/Cold
items.
Moderately soiled, colored items.
Warm/Warm
(select models)
Moderately soiled, colored items;
Warm/Cold
most wrinkle-free items.
Brightly colored, lightly soiled
Cold/Cold
items; washable woolens.
Note:
In wash water temperatures below 60
detergents do not dissolve well or clean well. Care
labels define cold water as up to 85
LOAD TYPE
°
F,
° F.
©2005 Maytag Services