Troy-Bilt CS 4265 Service Manual

Chipper/Shredder - CS4210 and CS4265
NOTE: These materials are for use by trained technicians who are experienced in the service and repair of outdoor power
equipment of the kind described in this publication, and are not intended for use by untrained or inexperienced individuals.
These materials are intended to provide supplemental information to assist the trained technician. Untrained or inexperienced
IMPORTANT: READ SAFETY RULES AND INSTRUCTIONS CAREFULLY
individuals should seek the assistance of an experienced and trained professional. Read, understand, and follow all instructions
This Service Manual is not a substitute for the Operator's Manual. You must read, understand
and common sense when working on power equipment. This includes the contents of the product's Operators Manual, supplied
with the equipment. No liability can be accepted for any inaccuracies or omission in this publication, although care has been
and follow all of the directions in this manual as well as the Operator's Manual before working
taken to make it as complete and accurate as possible at the time of publication. However, due to the variety of outdoor power
on this power equipment.
equipment and continuing product changes that occur over time, updates will be made to these instructions from time to time.
Therefore, it may be necessary to obtain the latest materials before servicing or repairing a product. The company reserves the
right to make changes at any time to this publication without prior notice and without incurring an obligation to make such
changes to previously published versions. Instructions, photographs and illustrations used in this publication are for reference
TROY-BILT LLC, P.O. BOX 361131, CLEVELAND, OH 44136-0019
use only and may not depict actual model and component parts. © Copyright 2005 MTD Products Inc. All Rights Reserved
MTD Products LLC - Product Training and Education Department
PRINTED IN USA
Service Manual
FORM NO.769-00944
(10/2003)