Config Menu - Lenovo ThinkPad L430 User Manual

• Preinstalled operating system license
• UEFI Secure Boot

Config menu

If you need to change the configuration of your computer, select Config from the ThinkPad Setup menu.
The following table lists the Config menu items.
Notes:
• The default settings are already optimized for you. If you consider changing the computer configuration,
proceed with extreme caution. Setting the configuration incorrectly might cause unexpected results.
• On each submenu, press Enter to show selectable options and select a desired option, or type desired
values from the keyboard directly.
• Some items are displayed on the menu only if the computer supports the corresponding features.
Table 4. Config menu items
Menu item
Network
112
User Guide
Submenu item
Wake On LAN
Ethernet LAN Option ROM
(for Legacy only boot
mode or Both with UEFI
first)
UEFI IPv4 Network Stack
(for UEFI Only boot mode
or Both with UEFI first)
UEFI IPv6 Network Stack
(for UEFI Only boot mode
or Both with UEFI first)
UEFI PXE Boot Priority
(for Both with UEFI first
boot mode, and IPv6
and IPv4 stacks are both
enabled.)
Selection Comments
• Disabled Enable the system to power on
when the Ethernet controller
• AC only
receives a magic packet.
• AC and Battery
If you select AC Only, the Wake on
LAN function works only when the
ac power adapter is attached.
If you select AC and Battery, the
Wake on LAN function works with
any power sources.
Notes:
• The magic packet type Wake on
LAN requires ac power.
• The Wake on LAN function
does not work when a hard disk
password is set.
• Disabled
Load the Ethernet LAN Option ROM
to enable startup from an integrated
• Enabled
network device.
• Disabled Enable or disable Internet Protocol
Version 4 (IPv4) network stack for
• Enabled
the UEFI environment.
• Disabled Enable or disable Internet Protocol
Version 6 (IPv6) network stack for
• Enabled
UEFI environment.
• IPv6 First Select network stack priority for
UEFI PXE boot.
• IPv4 First