Saw Chain Filing And File Gauges - Husqvarna 372 XP W X-TORQ Operator's Manual

Recommended original and replacement bar and chain combinations
These Husqvarna chain saw models are in the ANSI category of saws above 3,8 cu. in. and are not required to comply
with low kickback performance requirements. However, for these models we recommend the following cutting
equipment.
Bar
Length, inch Pitch, inch
15 3/8
16 3/8
18 3/8
20 3/8
24 3/8
28 3/8
Note: For the chains above you are free to choose between 0,050" and 0,058" gauge drive link for the corresponding
bar, see the table below.
0,050"/1,3 mm
0,058"/1,5 mm
WARNING! This chain saw is capable of severe kickback that could result in serious injury to the
!
user. Do not operate this chain saw unless you have extraordinary cutting needs and experience
and specialized training for dealing with kickback. Chain saws with significantly reduced kickback
potential are available.
Saw chain filing and file gauges
TECHNICAL DATA
Gauge, inch
0,058
0,058
0,058
0,058
0,058
0,058
H46 H47
H42 H48
Chain
Max. nose radius Type
Husqvarna H42,
11T
Husqvarna H48
Husqvarna H42,
11T
Husqvarna H48
Husqvarna H42,
11T
Husqvarna H48
Husqvarna H42,
11T
Husqvarna H48
Husqvarna H42,
11T
Husqvarna H48
Husqvarna H42,
11T
Husqvarna H48
Drive link count
56
60
68
72
84
92
English – 39