Husqvarna 128CD Owner's Manual page 14

itting the trimmer guard and
F
trimmer head (Model 128CD)
S Fit the correct trimmer guard (A) for use
with the trimmer head. Hook the trimmer
guard/combination guard onto the fitting on
the shaft and secure with the wing nut (B).
A
C
S Fit the dust cup (C) on the shaft. The nut
must be completely covered by the dust
cup.
S Hold the dust cup with a wrench to pre-
vent the shaft from rotating.
S Screw the trimmer head (D) onto the
shaft.
S To dismantle, follow the instructions in
the reverse order.
115275126 Rev. 1 9/15/09
ASSEMBLY
B
D
English--- 14