E-Mu 1616 Owner's Manual page 20

3 - CardBus Card & MicroDock
The MicroDock
5.1 Surround Speaker Connections
Left
Front
Left
Rear
Sub-Woofer
(with built-in power amps)
The 1/8" stereo jacks make it easy to connect to powered surround sound speakers.
Only three stereo cables are necessary with many speaker systems (see above). The 1/8"
jacks duplicate the 1/4" outputs.
You can connect the 1/8" stereo jacks to your surround speakers and connect the 1/4"
outputs to your other gear for music creation. When you want to monitor in surround,
simply open the 5.1 Session and turn on your surround speakers.
The chart below shows how to connect the outputs for 5.1 surround sound playback.
Multichannel WAVE to Surround Sound Speaker Channels
(using the factory 5.1 DVD Playback Session)
WAVE Strip Surround Channels
E-DSP WAVE 1/2 Front Left / Front Right
E-DSP WAVE 3/4 Center / Subwoofer
E-DSP WAVE 5/6 Rear Left / Rear Right
E-DSP WAVE 7/8 Side Left / Side Right
20
Center
Front Rear Ctr/Sub
1/4" Outputs 1/8" Outputs
1L = FL 1R = FR 1 (Tip = FL Ring = FR)
3L = C 3R = Sub 3 (Tip = C Ring = Sub)
2L = RL 2R = RR 2 (Tip = RL Ring = RR)
N/A N/A
Right
Front
Right
Rear
Creative Professional