Storing Patches; Changing The Midi Channel; Transposing The Keyboard - Creative Xboard25 Owner's Manual

XBoard mini.book Page 22 Thursday, April 21, 2005 11:09 AM
Basic Operations

Storing Patches

To Store a Patch:
1. Press the Store button. The Enter LED begins flashing.
2. Select the desired patch number using the data slider.
3. The Enter button will be flashing. Press Enter to store the patch. Press Home to
cancel the operation.
DATA ENTRY
Store Store
2 1

Changing the MIDI Channel

The MIDI specification allows for up to 16 channels to be used. This control allows
you to set the Basic MIDI channel for data transmitted by the X Board keyboard
and controllers.
To Change the MIDI Channel:
1. Press the MIDI Channel button. The MIDI Channel LED illuminates.
2. Select the desired MIDI channel using the data slider.
3. The Enter button will be flashing. Press Enter to confirm the operation.
Press Home to cancel the operation.

Transposing the Keyboard

E-MU Systems
OCTAVE TRANSPOSE OCTAVE TRANSPOSE
3
The keyboard can be transposed up and down ±4 octaves by
pressing the Transpose buttons. The octave number appears
momentarily in the display. The LED on the transpose
button remains lit to remind you that the keyboard is trans-
posed. The transposition value is stored with the patch.
To Store a Patch:
1. Press Store
2. Select Save Location
using the Data Slider
3. Press Enter.
22