Installing And Removing The Battery - Canon EOS 1Ds Mark III Instruction Manual

Installing and Removing the Battery

Installing the Battery
Load a fully charged LP-E4 battery pack into the camera.
Checking the Battery Level
When the power switch is set to <1> (p.36), the battery level will be
indicated in one of six levels:
Select the [6 Battery info.] menu to see the detailed battery information.
(p.187)
Remove the battery compartment
1
cap.
Grasp both sides of the cap and pull it
out.
Insert the battery.
2
Insert the battery firmly all the way,
and turn the release handle as shown
by the arrow.
Icon Level (%)
100 - 70 Sufficient battery level
z
69 - 50 Battery level exceeds 50%
H
49 - 20 Battery level below 50%
m
19 - 10 Battery level is low
x
b
9 - 1
n
0
Indication
Battery will be exhausted soon
Recharge the battery
29