Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Zanussi ZWT71401WA
Summary of Contents for Zanussi ZWT71401WA
- Page 1 User manual Washer Dryer ZWT 71401 WA...
-
Page 2: Table Of Contents
• Keep children and pets away from the appliance door when it is open. • If the appliance has a child safety device, we recommend you ac- tivate it. General Safety • Before maintenance, deactivate the appliance and disconnect the mains plug from the mains socket. www.zanussi.com... -
Page 3: Safety Instructions
• Do not touch the mains cable or the mains tween the appliance and the floor. plug with wet hands. • Adjust the feet to have the necessary space • This appliance complies with the E.E.C. Di- between the appliance and the carpet. rectives. Electrical connection www.zanussi.com... - Page 4 • Cut off the mains cable and discard it. tact with substances such as cooking oil, • Remove the door catch to prevent children acetone, alcohol , petrol, kerosene, spot re- and pets to get closed in the appliance. www.zanussi.com...
-
Page 5: Product Description
Child Safety device Make sure that children or pets do not climb in- to the drum. To prevent children and pets be- coming trapped inside the drum this machine incorporates a special feature. www.zanussi.com... -
Page 6: Control Panel
These are presented by relevant num- bers on the following pages. Programme selector dial EASY IRON button SPIN reduction button START/PAUSE button OPTION button DELAY START button EXTRA RINSE button DOOR LOCKED pilot light DRYING TIME button Display www.zanussi.com... - Page 7 Drying Time If you wish to carry out a timed drying pro- gramme, press this button until the drying time www.zanussi.com...
- Page 8 7 start flashing. • End of programme When the programme has finished the flashing zero ( ) is displayed, the pilot light 9 and the pilot light of button 7 go out and the door can be opened. www.zanussi.com...
-
Page 9: Washing Programmes
Long spin at 3 rpm Max. load 3 kg With this programme it is possible to wash items like pants, shirts or jackets in denim and also jersey realized with hi-tech materials. (The Extra Rinse option will be activated automatically). www.zanussi.com... - Page 10 Full loading is possible however with somewhat reduced cleaning results. 2) This option can be selected at the temperature of 40°C or higher only. 3) If using liquid detergents, a programme without PREWASH must be selected. www.zanussi.com...
-
Page 11: Drying Programmes
, then with acetic acid; treat any residual marks on white fabrics with bleach and then rinse thoroughly. 1) do not use acetone on artificial silk www.zanussi.com... -
Page 12: Drying Hints
• Particularly delicate items such as synthetic • Garments padded with foam-rubber or mate- curtains, woollen and silk, garments with rials similar to foam-rubber must not be ma- metal inserts, nylon stockings, bulky gar- chine dried; they represent a fire hazard. www.zanussi.com... -
Page 13: First Use
6 seconds, the acoustic signal is de- 1. Before pressing button 7: it will be impos- activated (except if there is a fault). By pressing sible to start the machine. these 2 buttons again, the acoustic signal is re- activated. www.zanussi.com... -
Page 14: Daily Use
(See "Washing programmes" for the maximum al- lowed spin speed). Press this button repeatedly to change the spin speed, if you want your laundry to be spun at a www.zanussi.com... - Page 15 You can cancel or modify the delay time at any starts blinking. Press the button again to re- moment, before you press button 7. start the programme. Selecting the delay start : 1. Select the programme and the required options. www.zanussi.com...
-
Page 16: Use - Drying
6. At the end of the programme, the buzzer spin speed allowed for the type of laundry sounds. The blinking appears on the dis- to remove any residual moisture and obtain play. The door pilot light 9 is on. the best drying performances. www.zanussi.com... - Page 17 • After the drying phase, thoroughly clean the fabric. empty drum, the gasket and the door with a 3. Select the required options by pressing the wet rag. relevant buttons. www.zanussi.com...
-
Page 18: Cleaning The Drawer Recess
Place a container move any traces of close to the pump (A) accumulated powder. to collect any spill- age. Pull out the emergen- cy emptying hose (B), place it in the con- tainer and remove its cap. www.zanussi.com... -
Page 19: Cleaning The Water Inlet Filters
Never remove the pump cover during a wash cycle, always wait until the appliance has finished the cycle, and is empty. When refitting the pump cover, ensure it is securely re- www.zanussi.com... -
Page 20: What To Do If
7 blinks, one of the fol- local Service Centre. lowing alarm codes appears on the display and some acoustic signals sound every 20 seconds to indicate that the machine is not working: www.zanussi.com... - Page 21 An option or a programme that ends with the water still in the tub or a and/or does not spin: that eliminates all the spinning phases has been selected. • Select the draining or spinning programme. The laundry is not evenly distributed in the drum. • Redistribute the laundry. www.zanussi.com...
- Page 22 In this case, redistribute the load manually and select the machine does not spin: spin programme. • Redistribute the laundry. The load is too small. • Add more items, redistribute the load manually and then select the spinning programme. www.zanussi.com...
-
Page 23: Technical Data
Service Centre will require this information. Mod..Prod. No..Ser. No..Technical data Dimensions Width 60 cm Height 85 cm Depth 55 cm www.zanussi.com... -
Page 24: Consumption Values
Installation Unpacking All transit bolts and packing must be removed before using the appliance. You are advised to keep all transit devices so that they can be refitted if the machine ever has to be transported again. www.zanussi.com... - Page 25 Positioning Install the machine on a flat hard floor. Make Water inlet sure that air circulation around the machine is not impeded by carpets, rugs etc. Check that the machine does not touch the wall or other kitchen units. www.zanussi.com...
- Page 26 Caution! The inlet hose must not be lengthened. If it is too short and you do not wish to move the tap, you will have to purchase a new, longer hose specially designed for this type of use. www.zanussi.com...
- Page 27 SHOWER SINK TOILET BATH BIDET 2. Onto a sink outlet spigot. WASHING DISHWASHER MACHINE RAINWATER ‘RUN-OFF’ FOUL DRAIN SURFACE WATER FOUL SEWERS DRAINS & SEWERS Loop SEWAGE TREATMENT UNTREATED WORKS DISCHARGE TREATED DISCHARGE RIVER RIVER www.zanussi.com...
-
Page 28: Building In
When installing the appliance into the kitchen furniture ensure, if possible, the hoses are 22±1,5 placed in either of the two recesses on the back of the appliance. 595-598 This will help to prevent the hoses from be- coming kinked or trapped. www.zanussi.com... - Page 29 (4) and the plate (5) (Fig. B and E). Mount the counter-magnet (6) and the hinges (1) as previously described. Recommendations regarding the con- struction and fitting of a base when the installation requires an integrated appli- ance to be raised. www.zanussi.com...
-
Page 30: Front View
Position the base into the recess with its front edge as far forward as the adjoining plinth line will allow. The reason for placing the base in this position is to allow a small strip of beading to be fitted in front of the appli- ance feet. www.zanussi.com... -
Page 31: Electrical Connection
Packaging materials then be washed at a lower temperature. The materials marked with the symbol • Measure out detergent according to the wa- recyclable. ter hardness, the degree of soiling and the >PE<=polyethylene quantity of laundry being washed. >PS<=polystyrene www.zanussi.com... - Page 32 www.zanussi.com/shop...