Installation - Zanussi ZWC1301 User Manual

Programmes
Standard 60 °C
cotton
Standard 40 °C
cotton
1) At the end of spin phase.
Off Mode (W)

Installation

Lifting the machine
Be careful when lifting the machine. Incorrect
methods of lifting can cause physical injuries
and also increase the risk of damage to the ma-
chine. Open the door and take hold of the top
inside of the door opening. You can also lift the
machine by gripping the rear overhang of the
top.
Warning! Never lift the machine by
gripping it's control panel, door, or
detergent dispenser.
Unpacking
When supplied the washing machine is packed
using a number of locking devices/packing
pieces to prevent drum and motor from damage
in transit All transit bolts and packing must be
removed before using the appliance.
You are advised to keep all transit devices so
that they can be refitted if the machine ever has
to be transported again.
www.zanussi.com
Load Energy con-
(kg) sumption
(kWh)
1,5 0.54
1,5 0.49
0.10
Water con- Approximate
sumption (litre)
duration (mi-
38
38
Left On Mode (W)
Spread some of the
polystyrene packag-
ing materials on the
floor behind the ma-
chine and then lay the
machine carefully rear
side down on them.
Make sure that no ho-
ses are crushed in
the process.
Return machine to it's upright position and re-
move the power supply cable and the drain-
ing and inlet hose from the hose holders on
the rear of the appliance.
Remaining
programme moisture
nutes)
127
137
1.10
Remove the polystyr-
ene base from the
bottom of the appli-
ance.
1)
(%)
53
53
19