Singer Expert Finish II Instruction Manual page 10

Cool Mist Spray
The Cool Mist Spray function can be used on any temperature setting. Use the
spray to dampen fabrics in order to remove tough wrinkles.
• Aim the nozzle at the garment.
• Press the Cool Mist Spray Button. You may need to press the button a few
times before the water sprays at full pressure.
• Iron as usual.
• DO NOT SPRAY SILK.
Cool Mist Spray Button
3-Way Smart Auto-Off
The SINGER
Smart Auto-Off switches the iron off if it has been left unattended.
NOTE: Auto-Off is not an on/off switch. Always unplug the iron when it is not
in use.
• If the iron is left on and is not moved for 8 minutes in a vertical position, it will
automatically shut off and an audible beep will sound.
• If the iron is left on its soleplate or tipped over, it will shut off after 30 seconds
and an audible beep will sound.
• When the iron is preparing to shut off, the
Display Panel and several audible beeps will sound. The LCD back light will
turn off after 30 seconds.
• To de-activate the Auto-Off, move the iron or shake gently. The iron will take
about 60 seconds to reach the previous soleplate temperature.
• Turn the iron completely off as described in the "Turning the Iron On and Off"
section.
10
Expert Finish ™ II Iron is equipped with an automatic shut-off. The
®
Cool Mist Spray
will start flashing on the LCD