Table of Contents
Advertisement
Table 35 Administration > Allowed Source (continued)
LABEL
Edit
Add
Del
Click Add or Edit to see the following screen.
Figure 44 Administration > Allowed Source > Add or Edit
The following table describes the items in this screen.
Table 36 Administration > Allowed Source > Add or Edit
LABEL
Source IP
Address
Source Subnet
Mask
Via Telnet
Via HTTP
Via SNMP
Ping Reply
Apply
Back
6.4 The Telnet Setup Screen
Use this screen to enable and configure the telnet server. Click Administration > Telnet Setup to
show the following screen.
EOC350 Series User's Guide
DESCRIPTION
Click this to edit an existing access rule.
Click this to add a new access rule.
Click this to delete an access rule.
DESCRIPTION
Type the source IP address that is allowed access by this rule.
Type the source IP subnet mask that is allowed access by this rule.
Select Enable to allow telnet access via this rule.
Select Enable to allow HTTP access via this rule.
Select Enable to allow SNMP access via this rule.
Select Enable to allow the device to respond to pings via this rule.
Click Apply to save your settings.
Click Back to return to the previous screen.
Chapter 6 Administration
47
Advertisement
Table of Contents
