Table of Contents
Advertisement
8. Managing Your Media Player and Connected Devices
Disconnecting a USB Drive, Camera, or Camcorder
To disconnect an external USB device from your media player:
1.
Stop and close all active movie, photo, or music files on the media player.
2.
Turn off your camera or camcorder (if applicable).
3.
Carefully unplug the device from the media player's USB port.
Disconnecting the Media Player
To disconnect the media player from your TV and/or network:
1.
Turn off the media player by pressing Power
2.
Disconnect the cables from the TV and/or the network connector.
3.
Unplug the power cable.
To reconnect the media player, refer to the printed Quick Start Guide that came in the box.
Resetting the Media Player to Its Original Settings
If necessary, you can reset the media player back to its factory default settings.
Note:
All custom settings are lost when you reset the media player.
You can reset the media player two ways:
•
Using the media player screens
•
Pressing the manual reset button
Resetting the Media Player On-Screen
To reset the media player to its factory default settings:
1.
On the Home screen, press Menu, select Settings, then press OK.
2.
Press Menu, select System Setup, then press OK.
OR
Use the left and right arrows on the remote to scroll through the Settings screens until you find
the System screen.
3.
On the System screen, select Factory Default, then press OK.
4.
Select OK, then press OK.
The Initial Setup screen opens.
Media Player User Guide
Disconnecting a USB Drive, Camera, or Camcorder
on the remote.
53
Advertisement
Table of Contents
