Seagate FreeAgent ater Quick Start Manual

FRO N T

QUICK START GUIDE

Component – If your television has an open Component video connection, use the
included Component cables to connect the media player to your television. You will also
need to connect the audio using the included composite AV cable (connect only the red
and white plugs to your television) or connect an optical SPDIF cable (not included).
If you have no sound, click Menu on the remote,
go to Settings > Audio, and select the correct
Audio Output setting for your TV.
COMPONENT
P P Y
r b
AV OUT
Composite – If your television does not have either HDMI or Component video
connections available, you can still connect your media player using the included
Composite AV cable. Plug the single connector into the back of the media player, and
the associated yellow, red and white cables into your Video In, Audio Right and Audio
Left inputs on your television.
COMPOSITE R AUDIO L
AV OUT
100579895_FA_Theater+_QSG_US_R1.indd 1
Now that you have the best HD Media Player available, let's get you set up quickly so
you can start enjoying all your most precious memories!
Plug it in, turn it on and go!
Optimized for use with a FreeAgent Go™ portable drive, the FreeAgent Theater+ media
player will also work with any USB attached external storage device, including hard
drives, flash drives, and even many digital still cameras and digital video cameras.
What's in the Box
1 FreeAgent Theater+™ media player
2 FreeAgent Go™ Portable drive with
USB cable (in media player and drive
bundle only)
3 Remote control with 2 AAA batteries
4 Composite audio/video cable
5 Component video cable
1
4
6
2
Connect to the Ethernet
Connect one end of the Ethernet cable into the LAN outlet on the rear of the media
player and the other into your computer network switch or router.
COMPONENT
P r P b Y OPTICAL HDMI LAN USB 12V DC RESET
3
Plug in power
Once you have connected your media player to your television, plug in the AC power
connector. The power LED on the front of the unit flashes amber while the media player
starts up. When the LED shines a steady amber, the unit is in standby/off mode. When
the unit is on, the LED is white.
COMPONENT
OPTICAL HDMI LAN USB 12V DC RESET
P r P b Y
6 Ethernet cable
7 AC power adapter
8 Quick Start Guide
9 Media Sync installation CD
(for Windows and Mac)
10 Warranty
2
3
5
8
7
10
COMPONENT
LAN LAN LAN LAN AV OUT OPTICAL HDMI LAN USB 12V DC RESET
P r P b Y
Flashing amber light:
Starting Up
Solid amber light:
Standby
Solid white light:
On
Easy Installation Steps
Look at the back of your television and decide which interface you would like to use to
connect your media player to your television. These descriptions are in order from
highest quality picture to lowest.
COMPONENT
P P
r b
1
Choose a connection
HDMI – If your television has an open HDMI port, this is the best way to connect your
media player. You will need to purchase a separate HDMI cable for this connection
method. Connect the HDMI cable from the media player to the open HDMI port on the
back of your television. This will carry both HD video as well as audio.
COMPONENT
9
AV OUT P r
At this point, your new FreeAgent Theater+ media player is installed and ready to be enjoyed!
Simply slide your FreeAgent Go drive into the built-in dock on the Theater+ media player, or
plug any other USB storage device or camera into one of the available USB ports. Then use
the included remote control to enjoy your favorite movies, photos and music!
Print Date:2009-Sep-2 20:22:08 CDT Released; Prod Rel; A; 100579895 Seagate Confidential
AV OUT
Y
P b Y OPTICAL HDMI LAN USB 12V DC RESET
PN: 100579895 07/09
7/11/09 11:30:45 AM