Easy, Step-By-Step Jumpstarting Instructions; Negative Grounded System - Husky Jump-Start System HSK020HD Owner's Manual

• DO NOT smoke or use inflammable items (matches, cigarette lighters, etc.) while
working on a vehicle's battery system
• When using this jumpstarter in proximity to the vehicle's battery and engine, stand the
unit on a flat, stable surface, and be sure to keep all cords and cables well away from
any moving parts
• Check unit periodically for wear and tear. Replace worn or defective parts immediately
- contact Husky ®
• Do not attempt to jumpstart a frozen battery
• NEVER submerge this unit in water
• Do not wear vinyl clothing when jumpstarting a vehicle; friction can cause dangerous
static electricity sparks. Remove all jewelry or metal objects; they can cause short cir-
cuits or react with battery acid to cause severe burns. Remove or secure any loose
clothing items and restrain long hair, before attempting jumpstart procedure
CAUTIONS:
• Vehicles that have on-board computerized systems may be damaged if vehicle battery
is jumpstarted. Before jumpstarting this type of vehicle, read the vehicle's owner's
manual to confirm that external starting assistance is advised.
• Excessive engine cranking can damage the vehicle's starter motor. If the engine fails
to start after the recommended number of attempts, discontinue jumpstart procedure
and look for other problems that may need to be corrected.

3.1 EASY, STEP-BY-STEP JUMPSTARTING INSTRUCTIONS

1. Turn OFF vehicle ignition and all accessories (radio, a/c, lights, cell phone, etc.).
Place vehicle in "park" and set the emergency brake.
2. Make sure jumpstart system's Safety Switch is turned OFF.
3. Remove the booster clamps from protective holster (fig. 2): simply squeeze the handles
and pull down on the clamp.
Figure 2
Clamp
Handle
4. Connect positive (+) red clamp to vehicle battery's positive terminal.
5. Connect negative (-) black clamp to chassis or a solid, non-moving, metal vehicle
component or body part. Never clamp directly to negative battery terminal or moving
part. If the audible alarm sounds, the polarity is not correct. Reverse the connections.
DO NOT TURN ON THE SAFETY SWITCH WITH ALARM SOUNDING.
Customer Service Department at (800) 916-7004.
Follow procedure for negative or positive
grounded system, as follows:

NEGATIVE GROUNDED SYSTEM

(NEGATIVE BATTERY TERMINAL IS
CONNECTED TO CHASSIS
COMMON METHOD
SLIDE DOWN AND ROTATE CLAMP OUTWARD
FROM SIDE OF UNIT TO REMOVE
MOST
9