Download Print this page

Scag Power Equipment FREEDOM Z 52 Specifications page 2

52" and 61" models

Advertisement

Belts:
Drive/Load Pulleys:
Instrument Panel :
Seat:
Foot Plate:
PTO - Electric Clutch:
Cutter Decks:
Cutter Deck Construction:
Cutter Deck Drive:
Anti-Scalp:
Cutter Deck Spindles:
Cutter Deck Height Adjustment:
Cutting Range:
Number of Cutter Blades:
Deck Leveling:
Total Length:
Total Width (with discharge chute in mowing position):
Total Width (with discharge chute in transport position):
Height:
Weight:
Warranty:
*See Limited Warranty statement for complete details.
®
Kevlar cord. Self-adjusting, spring-loaded, self-tightening.
Steel pulleys. Steel dust and debris covers over idler pulley bearings to keep
foreign material out and extend bearing life.
Key switch, throttle, manual choke, BBC switch, digital "SmartSense"
hourmeter within easy view
Adjustable, thick cushioned seat with padded arm rests; retractable seat belt
Extra-large foot plate for improved comfort; easy to get on and off of mower.
Pierced, extruded steel tread ensures solid footing. Rubber iso-mounted for
additional operator comfort.
Ogura clutch with adjustable air-gap for long component life
52" or 61" deck. Floating, adjustable, anti-scalping design.
Welded steel with 7-gauge deck skirt, 10-gauge top with 11-gauge
reinforcement plate/baffles
Belt driven -- Straight belt for long life, not a twisted "mule" drive
One roller on left-front edge, two rollers on center-front edge, skid plate at
rear-center of deck
Heavy-duty, no-maintenance spindles with cast aluminum housing & sealed
ball bearings; reliable, worry-free performance day in and day out
Foot pedal/peg lift with self-locking mechanism at transport
position. Large knurled foot pedal/peg for "no-slip" deck lifting.
1.5" to 5" in .25" increments. Easily adjustable while seated.
3 Marbain blades
4-corner cutter deck adjustment mechanisms allow for easy deck leveling and
pitch adjustment to ensure a smooth, even cut
52" models = 73"
61" models = 79"
52" models = 61"
61" models = 61.5"
805 - 875 lbs.
3 Yr. / 500 Hour Non-Commercial Mower Warranty*—Parts & labor
1 Yr. Commercial Mower Warranty*—Parts & labor
2 Yr. Engine Warranty—Minimum two-year warranty covered directly
through the individual engine manufacturer.
All specifications subject to change without
notice. Actual ground speeds may vary.
52" models = 64.5"
61" models = 73.5"
52" models = 53"
61" models = 62"
WWW.SCAG.COM

Advertisement

loading

This manual is also suitable for:

Freedom z 61