GE JD900BKBB Dimensions And Installation Information

JD900WK/CK/BK
GE Profile 30" Drop-In Electric Range
™
Dimensions and Installation Information (in inches)
Note: Cabinets installed adjacent to slide-in ranges must have an
KW Rating
adhesion spec of at least 194° temperature rating.
240V
11.6
Note: To reduce possibility of scorching the side walls above the
208V
8.7
countertop when no load is present on burners, it is recommended
that a minimum of 6" spacing from adjacent side wall be allowed for
Breaker Size
possible extended, high-heat, element operation.
240V 40 Amps
IMPORTANT: 30" DROP-IN RANGES ARE DESIGNED TO HANG
208V 40 Amps
FROM THE COUNTERTOP. IT DOES NOT REST ON THE FLOOR.
FOR INSTALLATION ALTERNATIVES, REFER TO INSTALLATION
INSTRUCTIONS PACKED WITH PRODUCT.
Optional Kits For Drop-In Electric Ranges (Available At Additional Cost)
Accessory Backguards Maintop Filler
(Attaches to the back of (Fills gap between
range as a backguard when cooktop and wall when
unit is installed in 30" unit is installed in 30"
free-standing cutout) free-standing cutout)
JXS32SS (Stainless) - 4" High JXS66WW—White
JXS32WW (White) - 4" High JXS66CC—Bisque
JXS32CC (Bisque) - 4" High JXS66BB—Black
JXS32BB (Black) - 4" High
JXS37WW (White) - 5-1/4" High
JXS37CC (Bisque) - 5-1/4" High
JXS37BB (Black) - 5-1/4" High
Installation information: Before installing, consult installation
instructions packed with product for current dimensional data.
For answers to your Monogram, GE Profile
®
GE appliance questions, visit our website at
®
ge.com or call GE Answer Center ® service,
800.626.2000.
or
™
30
24
2-7/8"
To Front Surface
of Countertop
20-5/8" Door
Clearance
From Front
Surface of
Countertop
30" Min.
6" Min.
from walls
23-3/16
If necessary,
build upsides
to 1-1/4" thick 27-1/2
to provide
countertop
36
support
30
All GE ranges are equipped with
an Anti-Tip device. The installation
of this device is an important,
required step in the installation
of the range.
24
Specification Revised 1/08
2-7/8"
To Front Surface
of Countertop
Accessory
Backguard
A/B*
31-1/4
27
*JXS37 is 5-1/4" and JXS32 is
26-1/2**
**Total depth from wall to
(excluding handle)
front of closed oven door
including handle is 29-1/2.
Shave Raised Edge To Clear
31-1/8" Wide Control Panel
Excluding Models JDS28 and JDP39
9/16
30" Min.
Acceptable Electrical Outlet
Area Also In Adjacent
18" Min.
Cabinet Or Under Floor
Conduit is 40" long
25
7-1/2
Accessory
Listed by
Backguard
Underwriters
Laboratories
31-1/4
220825
A/B*